A tough Carburetor to find, the Marvel TSX-848 is designed specifically for the D19 Gas Tractor. There is a replacement Zenith Carburetor out in the aftermarket, but if you're looking for the OEM Marvel Schebler here it is. This particular Carburetor's mounting flange was found to be cracked after the glass beading was done. To insure correct strength, function and proper seating of the gasket when bolted to the intake manifold, the flange has been welded. This will have no effect at all on how the Carburetor performs. Ready to bolt on to your D19! Available exchange or outright.
Price shown is the exchange price less the shipping. For outright price add $150. core charge. On exchange basis, we will need your core first before we ship!
1601-34 Rebuilt M/S TSX-848 D19 Tractor Only
Every B&B rebuilt Carburetor is torn down and accessed of what is needed to get them back in tip top shape. Once accessed, the cleaning cycle starts. Heavy dirt & grime are removed by hand. Next, each Carburetor goes into the cleaning tank for a day or two depending on how dirty they are. After the tank soaking, a soap wash and blow dry is next. The first inspection is checking for damaged areas or parts. The Carburetor now heads to the Glassbeader for full cleaning inside and out. Another soap wash and blow dry to remove any glassbead and residue. Inspection #2 takes place checking for fuel bowl or mounting flange hairline cracks. After #2 inspection it's off to the assembly bench for any brass parts polishing, throttle shaft work, tapping out all threaded holes, idle and power circuits cleared, and final assembly with top quality rebuilding kits and replacement parts.
